China Jinan Golden Tianma Machine Building Co,Ltd.

Showing 31 - 40 of 61, total 7 pages [First] [Previous] [Next] [Last]

pvc profile auto four axis water slot milling machine
Specification: SCX01-4
Detail: The machine is a specialized equipment processing all types of waterspouts and grooves for gas-pressure balance of plastic door and window. On the top, below, and horizontal there is a working part for milling. Which ensures p...

milling machine for the end faces of aluminum-plastic
Specification: LXD02-200
Detail: The machine is used for processing the step face, rectangular concave slot and rabbet, and other end faces invarious shapes within an angle of -55 degree to +55 degree, that are made of aluminum or plastic section. The machine...

pvc profile sealed cover milling machine
Specification: SFX01-160
Detail: The machine applies to milling cover groove for profile bar of plastic door and window. it adopts two molding cutters to cooperate with material leading groove and can process different dimensions of cover groove ; It has the ...

double mitre saw for aluminum and pvc profile
Specification: SJZ2-450x3700
Detail: The machine applies to 45-90 cutting inside and outside for aluminum alloy and plastic profiled bar. It adopts pneumatic drive and straight line feeding. So it has the characteristics of balanced feeding and exact anchor point...

pvc win-door v-cutting saw
Specification: VJ02-65
Detail: The machine applies to 90 v groove cutting for aluminum and plastic profiled bar which is clamped and cut by pneumatic drive ; it has characteristics of simple operation , high safety, exact cutting dimension, and convenient...

pvc win-door glazing bead saw
Specification: SYJ03-1800
Detail: The machine applies to processing glass strip ; it adopts saw bits that can cut off and chamfer angle for glass strip at one time .the machine is horizontal fixed.It has characteristics of simple operation ,stable running ,con...

saw machine for cutting aluminum- plastic section
Specification: LJMJ-420A
Detail: Introduction: Used for corner connector of aluminum profile cutting and for plastic profile cutting . Imported carbide saw blade give accurate processing and high endurance. Linear bearing motion pair gave less resistance...

face milling of automatic cutting tool gong for aluminum door an
Specification: LDX2-200B
Detail: Technical Parameter Air pressure 0.5-0.8*** Air consumption 200L/min Input voltage 380V 50HZ Total power 1.5KW*2 Speed 2800rpm Air consumption 200mm Range of processing 0-80mm ×î´óÏ³Ï÷·¶Î§ 200¡Á80¡Á45mm

drill combination for aluminum-plastic door/window
Specification: LDZZ4-13
Detail: Technical Parameter Air pressure 380V 50HZ total power 0.75KW*4 Speed 1400rpm The max of hole's diameter 13mm The max distance between two hole 5000mm The mix distance of each hole 300mm The mix dimension of prof...

double mitre prelision saw for aluminum profile
Specification: LJZ2-500*4200
Detail: The main axle of the saw is made precisely highly,and isspecialized for the hard ally saw .the go and back of the cutting can synchronous with the left and right moving of the head of the machine,is made by the linary bearing ...


Showing 31 - 40 of 61, total 7 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6 7